Common Authentication Technology Next Generation F. Schmaus
Internet-Draft University of Erlangen-Nuremberg
Intended status: Informational March 28, 2017
Expires: September 29, 2017

The Hashed Token SASL Mechanism
draft-schmaus-kitten-sasl-ht-00

Abstract

This document specifies a SASL mechanism designed to be used with short-lived, exclusively ephemeral tokens.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on September 29, 2017.

Copyright Notice

Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.


Table of Contents

1. Introduction

This section specifies the the family of Hashed Token (HT-*) SASL mechanisms. It provides hash agility, mutual authentication and is secured by channel binding.

This mechanism was designed to be used with short-lived tokens for quick, one round-trip, re-authentication of a previous session. Clients are supposed to request such tokens from the server after being authenticated using a "strong" SASL mechanism (e.g. SCRAM). Hence a typical sequence of actions using SASL-HT may look like the following:

A) Client authenticates using a strong mechanism (e.g., SCRAM)
B) Client requests secret SASL-HT token
   <normal client-server interaction here>
C) Connection between client and server gets interrupted
   (e.g., WiFi ↔ GSM switch)
D) Client resumes previous session using the token from B
E) Client requests secret SASL-HT token
   [goto C]

An example application protocol specific extension based on SASL-HT is [XEP-ISR-SASL2].

Since the token is not salted, and only one hash iteration is used, the HT-* mechanism is not suitable to protect long-lived shared secrets (e.g. "passwords"). You may want to look at [RFC5802] for that.

1.1. Conventions and Terminology

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119].

Additionally, the key words "MIGHT", "COULD", "MAY WISH TO", "WOULD PROBABLY", "SHOULD CONSIDER", and "MUST (BUT WE KNOW YOU WON'T)" in this document are to interpreted as described in RFC 6919 [RFC6919].

1.2. Applicability

Because this mechanism transports information that should not be controlled by an attacker, the HT-* mechanism MUST only be used over channels protected by TLS, or over similar integrity-protected and authenticated channels. In addition, when TLS is used, the client MUST successfully validate the server's certificate ([RFC5280], [RFC6125]).

The family of HT-* mechanisms is not applicable for proxy authentication, since they can not carry a authorization identity string (authzid).

2. The HT-* Family of Mechanisms

Each mechanism in this family differs by the choice of the hash algorithm and the choice of the channel binding [RFC5929] type.

A HT mechanism name is a string "HT-" followed by the capitalized "Hash Name String", followed by "-", and suffixed by one of 'ENDP' and 'UNIQ'.

Hence each mechanism has a name of the following form:

HT-<hash-alg>-<cb-type>

Where <hash-alg> is the capitalized "Hash Name String" of the IANA "Named Information Hash Algorithm Registry" [iana-hash-alg] as specified in [RFC6920], and <cb-type> is one of 'ENDP' or 'UNIQ' denoting the channel binding type. In case of 'ENDP', the tls-server-end-point channel binding type is used. In case of 'UNIQ', the tls-unique channel binding type is used. Valid channel binding types are defined in the IANA "Channel-Binding Types" registry [iana-cbt] as specified in [RFC5056].

Mapping of CBT to Channel Bindings
CBT Channel Binding Type
ENDP tls-server-end-point
UNIQ tls-unique

The following table lists the HT-* SASL mechanisms registered this document.

Defined HT-* SASL mechanisms
Mechanism Name Hash Algorithm Channel-binding unique prefix
HT-SHA-512-ENDP SHA-512 tls-server-end-point
HT-SHA-512-UNIQ SHA-512 tls-unique
HT-SHA3-512-ENDP SHA3-512 tls-server-end-point
HT-SHA-256-UNIQ SHA-256 tls-unique

3. The HT Mechanism

The mechanism consists of a simple exchange of exactly two messages between the initiator and responder.

The following syntax specifications use the Augmented Backus-Naur form (ABNF) notation as specified in [RFC5234].

3.1. Initiator First Message

The HT-* SASL mechanism starts with the initiator-msg, send by the initiator to the responder.

initiator-msg = authcid-length authcid-data initiator-hashed-token

authcid-length = 4OCTET

authcid-data = 1*OCTET

initiator-hashed-token = 1*OCTET

The initiator message starts with an unsigned 32-bit integer in big endian. It denotes length of the authcid-data, which contains the authentication identity. Before sending the authentication identity string the initiator SHOULD prepare the data with the UsernameCaseMapped profile of [RFC7613].

The initiator-hashed-token value is defined as: HMAC(token, "Initiator" || cb-data)

HMAC() is the function defined in [RFC2104] with H being the selected HT-* hash algorithm, 'cb-data' represents the data provided by the channel binding type, and 'token' are the UTF-8 encoded octets of the token string which acts as shared secret between initiator and responder.

The initiator-msg MUST NOT be included in TLS 1.3 0-RTT early data (see [I-D.ietf-tls-tls13]).

3.2. Final Responder Message

This message is followed by a message from the responder to the initiator. This 'responder-msg' is defined as follows:

responder-msg = 1*OCTET

The responder-msg value is defined as: HMAC(token, "Responder" || cb-data)

The initiating entity MUST verify the responder-msg to achieve mutual authentication.

4. Compliance with SASL Mechanism Requirements

This section describes compliance with SASL mechanism requirements specified in Section 5 of [RFC4422].

  1. "HT-SHA-256-ENDP", "HT-SHA-256-UNIQ", "HT-SHA-3-512-ENDP" and "HT-SHA-3-512-UNIQ".
  2. Definition of server-challenges and client-responses:
    a
    HT is a client-first mechanism.
    b
    HT does not send additional data with success.
  3. HT is capable of transferring authorization identities from the client to the server.
  4. HT does not offer any security layers (HT offers channel binding instead).
  5. HT does not protect the authorization identity.

5. Security Considerations

To be secure, HT-* MUST be used over a TLS channel that has had the session hash extension [RFC7627] negotiated, or session resumption MUST NOT have been used.

6. IANA Considerations

IANA has added the following family of SASL mechanisms to the SASL Mechanism registry established by [RFC4422]:

To: iana@iana.org
Subject: Registration of a new SASL family HT

SASL mechanism name (or prefix for the family): HT-*
Security considerations:
  Section FIXME of draft-schmaus-kitten-sasl-ht-00 
Published specification (optional, recommended):
  draft-schmaus-kitten-sasl-ht-00 (TODO)
Person & email address to contact for further information:
IETF SASL WG <kitten@ietf.org>
Intended usage: COMMON
Owner/Change controller: IESG <iesg@ietf.org>
Note: Members of this family MUST be explicitly registered
using the "IETF Review" [@!RFC5226] registration procedure.
Reviews MUST be requested on the Kitten WG mailing list
<kitten@ietf.org> (or a successor designated by the responsible
Security AD).

7. References

7.1. Normative References

[I-D.ietf-tls-tls13] Rescorla, E., "The Transport Layer Security (TLS) Protocol Version 1.3", Internet-Draft draft-ietf-tls-tls13-19, March 2017.
[RFC2104] Krawczyk, H., Bellare, M. and R. Canetti, "HMAC: Keyed-Hashing for Message Authentication", RFC 2104, DOI 10.17487/RFC2104, February 1997.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997.
[RFC4422] Melnikov, A. and K. Zeilenga, "Simple Authentication and Security Layer (SASL)", RFC 4422, DOI 10.17487/RFC4422, June 2006.
[RFC5056] Williams, N., "On the Use of Channel Bindings to Secure Channels", RFC 5056, DOI 10.17487/RFC5056, November 2007.
[RFC5234] Crocker, D. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, DOI 10.17487/RFC5234, January 2008.
[RFC5280] Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R. and W. Polk, "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008.
[RFC5929] Altman, J., Williams, N. and L. Zhu, "Channel Bindings for TLS", RFC 5929, DOI 10.17487/RFC5929, July 2010.
[RFC6125] Saint-Andre, P. and J. Hodges, "Representation and Verification of Domain-Based Application Service Identity within Internet Public Key Infrastructure Using X.509 (PKIX) Certificates in the Context of Transport Layer Security (TLS)", RFC 6125, DOI 10.17487/RFC6125, March 2011.
[RFC6919] Barnes, R., Kent, S. and E. Rescorla, "Further Key Words for Use in RFCs to Indicate Requirement Levels", RFC 6919, DOI 10.17487/RFC6919, April 2013.
[RFC6920] Farrell, S., Kutscher, D., Dannewitz, C., Ohlman, B., Keranen, A. and P. Hallam-Baker, "Naming Things with Hashes", RFC 6920, DOI 10.17487/RFC6920, April 2013.
[RFC7613] Saint-Andre, P. and A. Melnikov, "Preparation, Enforcement, and Comparison of Internationalized Strings Representing Usernames and Passwords", RFC 7613, DOI 10.17487/RFC7613, August 2015.
[RFC7627] Bhargavan, K., Delignat-Lavaud, A., Pironti, A., Langley, A. and M. Ray, "Transport Layer Security (TLS) Session Hash and Extended Master Secret Extension", RFC 7627, DOI 10.17487/RFC7627, September 2015.
[iana-cbt] Williams, N., "IANA Channel-Binding Types", 2010.
[iana-hash-alg] Williams, N., "IANA Named Information Hash Algorithm Registry", 2010.

7.2. Informative References

[RFC5802] Newman, C., Menon-Sen, A., Melnikov, A. and N. Williams, "Salted Challenge Response Authentication Mechanism (SCRAM) SASL and GSS-API Mechanisms", RFC 5802, DOI 10.17487/RFC5802, July 2010.
[XEP-ISR-SASL2] Schmaus, F., "XEP-XXXX: Instant Stream Resumption", 2017.

Appendix A. Acknowledgments

Thanks to Thijs Alkemade.

Author's Address

Florian Schmaus University of Erlangen-Nuremberg EMail: schmaus@cs.fau.de